Maybe 'Now Playing' isn't quite enough for you. Maybe you want something with a bit more... length. This might be just what you're looking for. An Album of The Day wall mounted record display shelf, in the same style as my Now Playing and Now Spinning shelves. (I also have small record display shelves in my shop.) Choose your colour and I'll print it and send it to you or your chosen recipient.
You'll receive one shelf and three No More Nails removable adhesive strips, which you can mount on the back and stick to a wall, or screws and plugs, depending on what you've chosen. (Please you all three sticky tabs, spaced evenly.) These are rated to hold up to 2kg per strip so you should be alright with most records, though I probably wouldn't try hanging your Tchaikovsky complete works on it.
It's a 3D printed item so bear in mind you'll get some surface texture, but I'll always make sure it's a good print.
I have other stands and shelves available.
Any questions just give me a shout.
Cheers
Rob
[Instructions]
For No More Nails strips, make sure you don’t touch the back of the shelf since oils from your fingers will interfere with the adhesive. Remove the backing paper from the three strips and press them onto the back of the shelf. Press down on a hard surface for ten seconds. Then remove the remaining backing paper, line up with a spirit level and press firmly against your wall for ten seconds. Wait a couple of hours before putting any weight on.
No More Nails strips (and any other Command-style strips) must only be used on smooth, painted surfaces where the paint is sound and well-adhered. They must not be used on wallpapered or textured surfaces.
For screws, use the included drilling template to make two 6mm in holes in your wall, then insert the Rawlplugs. Screw the screws in so that the heads are 5mm from the surface of the wall, then slot the shelf onto the screws. If it’s too loose, tighten the screws a quarter turn at a time. If too tight, loosen them.
[Processing]
These will usually be ready in 2 or 3 days.
Maybe 'Now Playing' isn't quite enough for you. Maybe you want something with a bit more... length. This might be just what you're looking for. An Album of The Day wall mounted record display shelf, in the same style as my Now Playing and Now Spinning shelves. (I also have small record display shelves in my shop.) Choose your colour and I'll print it and send it to you or your chosen recipient.
You'll receive one shelf and three No More Nails removable adhesive strips, which you can mount on the back and stick to a wall, or screws and plugs, depending on what you've chosen. (Please you all three sticky tabs, spaced evenly.) These are rated to hold up to 2kg per strip so you should be alright with most records, though I probably wouldn't try hanging your Tchaikovsky complete works on it.
It's a 3D printed item so bear in mind you'll get some surface texture, but I'll always make sure it's a good print.
I have other stands and shelves available.
Any questions just give me a shout.
Cheers
Rob
[Instructions]
For No More Nails strips, make sure you don’t touch the back of the shelf since oils from your fingers will interfere with the adhesive. Remove the backing paper from the three strips and press them onto the back of the shelf. Press down on a hard surface for ten seconds. Then remove the remaining backing paper, line up with a spirit level and press firmly against your wall for ten seconds. Wait a couple of hours before putting any weight on.
No More Nails strips (and any other Command-style strips) must only be used on smooth, painted surfaces where the paint is sound and well-adhered. They must not be used on wallpapered or textured surfaces.
For screws, use the included drilling template to make two 6mm in holes in your wall, then insert the Rawlplugs. Screw the screws in so that the heads are 5mm from the surface of the wall, then slot the shelf onto the screws. If it’s too loose, tighten the screws a quarter turn at a time. If too tight, loosen them.
[Processing]
These will usually be ready in 2 or 3 days.
