[Details]
Display your NES game cartridges with these display brackets.
You can select multiples from the dropdown but if you want them in different colours just add a note. Each bracket comes with a screw and rawlplug to attach it to the wall.
These are 3D printed so there will be some surface texture, which is a natural result of the fact that the process involves laying down a tiny bead of plastic in layers. It's tidy, but it's not a completely flat or shiny surface like something that's been injection moulded. I think it's part of the appeal though.
Now, I don't have a huge collection of games, so I've checked these with the ones I have, but if you have any issues just shout. I'm sure there'll be some weird cartridges out there that are slightly different, and if you've got something like that I'll put something together for you. (You might find some are slightly tighter than others, but they should be fine. I'm talking about weird protrusions or non-OEM things.)
Cheers
Rob
[Instructions]
If using a screw, drill a 6mm hole and insert a Rawplug, then screw the shelf into the plug.
If using Command Strips, fasten two to the back of the shelf by pressing firmly against a hard surface for ten seconds. Then press firmly against the wall for a further ten seconds. Wait a couple of hours before putting any weight on.
[Processing]
These will usually be ready in a few days.
[Details]
Display your NES game cartridges with these display brackets.
You can select multiples from the dropdown but if you want them in different colours just add a note. Each bracket comes with a screw and rawlplug to attach it to the wall.
These are 3D printed so there will be some surface texture, which is a natural result of the fact that the process involves laying down a tiny bead of plastic in layers. It's tidy, but it's not a completely flat or shiny surface like something that's been injection moulded. I think it's part of the appeal though.
Now, I don't have a huge collection of games, so I've checked these with the ones I have, but if you have any issues just shout. I'm sure there'll be some weird cartridges out there that are slightly different, and if you've got something like that I'll put something together for you. (You might find some are slightly tighter than others, but they should be fine. I'm talking about weird protrusions or non-OEM things.)
Cheers
Rob
[Instructions]
If using a screw, drill a 6mm hole and insert a Rawplug, then screw the shelf into the plug.
If using Command Strips, fasten two to the back of the shelf by pressing firmly against a hard surface for ten seconds. Then press firmly against the wall for a further ten seconds. Wait a couple of hours before putting any weight on.
[Processing]
These will usually be ready in a few days.
